FBX's special effect Snow products are second to none. Firstly, there is Super Snocene, a semi-permanent decorative snow spray for windows, mirrors, decorations, trees, foliage and scenery. Secondly, there is Kolsnow - a product that gives a falling snow effect using two differing size nozzles from an aerosol can.
Super Snocene. Supplied in 450ml. aerosol spray can.
Directions for use.
1. Best results are obtained if can is warm. Keep can in normal warm room (20 degrees Centigrade/68 degrees Fahrenheit) for several hours before use or warm the can in hand hot water (50 degrees C. max.) for two minutes.
2. Shake can well. Spray with can upright from about 15 inches away. Build up with thin layers to avoid cracking particularly if can is cold.
3. After use invert can and spray to clear nozzle. In case of blockage nozzle and clear with pin .
4. Remove spray with plastic spatula or similar scraper. Clean any residues with hot soapy water or white spirit, turps or meths.
5. Do not spray on polished surfaces and sensitive materials. Try a small unobtrusive area first.
6. Due to environmental considerations the propellant is ozone-friendly but flammable. No C F C. The snow is non-toxic and flame resistant after gas evaporation (i.e. a few minutes)
Kolsnow - Supplied in cost effective large 750 ml aerosols.
Falling and melting snow effect for winter scenes on set, on stage and in large photographic studios. Has two nozzles - fine snow/large snow flakes. Used in Roman Polanski’s stage production of ‘Beauty and the Beast’ in the UK and Europe.
Directions for use.
Extremely easy and safe to use. Just shake the can, position self in high position above the set and press aerosol button. The snow falls extremely slowly in large or small flake size and on reaching the ground melts exactly as none settling snow and then disappears. A superb product. The picture at the top of the page is obviously nature's snow but we thought we would wet your appetite!
Super Snocene. Supplied in 450ml. aerosol spray can.
Directions for use.
1. Best results are obtained if can is warm. Keep can in normal warm room (20 degrees Centigrade/68 degrees Fahrenheit) for several hours before use or warm the can in hand hot water (50 degrees C. max.) for two minutes.
2. Shake can well. Spray with can upright from about 15 inches away. Build up with thin layers to avoid cracking particularly if can is cold.
3. After use invert can and spray to clear nozzle. In case of blockage nozzle and clear with pin .
4. Remove spray with plastic spatula or similar scraper. Clean any residues with hot soapy water or white spirit, turps or meths.
5. Do not spray on polished surfaces and sensitive materials. Try a small unobtrusive area first.
6. Due to environmental considerations the propellant is ozone-friendly but flammable. No C F C. The snow is non-toxic and flame resistant after gas evaporation (i.e. a few minutes)
Kolsnow - Supplied in cost effective large 750 ml aerosols.
Falling and melting snow effect for winter scenes on set, on stage and in large photographic studios. Has two nozzles - fine snow/large snow flakes. Used in Roman Polanski’s stage production of ‘Beauty and the Beast’ in the UK and Europe.
Directions for use.
Extremely easy and safe to use. Just shake the can, position self in high position above the set and press aerosol button. The snow falls extremely slowly in large or small flake size and on reaching the ground melts exactly as none settling snow and then disappears. A superb product. The picture at the top of the page is obviously nature's snow but we thought we would wet your appetite!
